Omron CJ1W-FLN22, Operation Manual, Page: 95 / 277

69
Setting Data Link Tables Section 5-2
System Setting (Local
Node Setup Area)
The Local Node Setup Area can be set so that data from any PLC area can
be used as the send data from the local node.
Note Select Option - Switch display - Hex . It will be possible to display and input
words, sizes, and addresses in hexadecimal.
Item Content
Area 1 (Area 2) Memory Area
(default: Area 1 CIO, Area 2 DM)
Sets the PLC area in which Cyclic Data Areas 1 and 2 for the local node are stored.
The following areas can be set: CIO, WR, HR, DM, and EM0 to EMC.
Area 1 (Area 2) start word
(default: 0)
Sets the beginning word of the PLC area in which Cyclic Data Areas 1 and 2 for the
local node are stored.
Area 1 (Area 2) size
(default: 0)
Sets the size of the PLC area in which Cyclic Data Areas 1 and 2 for the local node
are stored. This setting also determines the size allocated to this node for Common
Memory.
Area 1 (Area 2) Start address of
Common Memory
(default: 0)
Sets the beginning address of the Common Memory allocated to Area 1 (or Area 2).