Omron CJ1W-FLN22, Operation Manual, Page: 214 / 277

Operating Procedures Section 11-2
188
2. Click the Yes Button. The transfer will begin and the following message will
be displayed if the transfer ends normally.
3. Click the OK Button.
Comparing the FL-net
Setup on the Computer to
the Setup in the PLC
1,2,3... 1. Select Setting - Compare with PLC.
The results of comparison will be displayed.
When the Setup is the Same:
When There Are Differences
2. Click the OK Button. If there were differences, they will be displayed in a
list.
3. Click the Close Button.