Omron CJ1W-FLN22, Operation Manual, Page: 211 / 277

185
Operating Procedures Section 11-2
Node Status The status of remote nodes participating in the FL-net network is shown. Data
from unmapped remote nodes can also be displayed.
■ Node Number
Sets the node number of the node for which the status is to be read.
■ Local Node Status (only when local node is specified)
Shows the status of the local node when the node set by the node number is
the local node. In this case, the same data is displayed as for the network sta-
tus.
Corresponding FL-net Standard Flag Names
■
Node Status
Shows the participation status of the node.
■
FA Link Status
Shows the network status of the node set by the node number.
■ Upper Layer Status
Shows the upper layer status.
CX-FLnet FL-net standard flag name
Common memory setting range error Initialization Error Flag
Duplicate node number notification Duplicate Node Number Flag
Token monitoring timeout error Token Monitoring Timeout Flag
Frame standby error Reception Standby Flag
Status Meaning
RUN CPU Unit is running (RUN/MONITOR mode).
STOP CPU unit is stopped (PROGRAM mode).
Status Meaning
NORMAL CPU Unit is normal.
WARNING Non-fatal error has occurred.
ALARM Fatal error has occurred