Omron CJ1W-FLN22, Operation Manual, Page: 249 / 277

223
FL-net Unit Support Software Ver. 1.6 Appendix F
Operating Procedure
Note (1) The new settings go into effect when the PLC's power is turned ON again or when the FL-net Unit
is restarted.
(2) Confirm that the communications settings are correct for the environment in which they are to be
used.
Make communications settings.
↓
Unit settings
↓
Monitoring
System settings
Make settings in CPU Bus Unit Setup Area.
Select monitor function.
System settings
Make local node settings.
Click Start Button.
System settings
Make other node settings.
Display monitor screens.
Unit Area settings
When required.
Check display contents.
Transfer settings. Close monitor screens.
Turn PLC power ON or restart the FL-net Unit. Exit FL-net Unit Support Software.
Begin FL-net Unit operation.
Confirm that operation is normal, and then save
the settings.
Exit the FL-net Unit Support Software.
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
Install the FL-net Unit Support Software (Refer to
11-2 Installation
.)