Omron CJ1W-FLN22, Operation Manual, Page: 134 / 277

Command/Response Reference Section 7-5
108
Mode Setting (Response) The mode set in the system setup is returned.
1. System Type
Bits 12 to 15 show the type of Unit.
2. IP Address Setting
These bits provide details about the type of IP address settings.
3. FA Link Allocation Table Storage Method
This bit provides details about where the data link (FA link allocation) table
is stored.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
First byte
Second byte
1) System type
2) IP
address
setting
3) FA Link allocation table storage method
4) FA Link startup method
5) Message procedure check
6) Broadcast format
7) Data sending order (sequential/reverse direction)
8) Baud rate
− − − −
Bit Description
15 14 13 12
0 0 0 1 FL-net Unit
Others Parameter error
Bit Description
7 6
0 0 Operates with the IP address switch setting on the back of the Unit.
1 0 Operates with the IP address switch setting on the back of the Unit
and the node address switch setting on the front of the Unit.
0 1 Operates with the CPU Bus Unit system setting that is set through the
CX-FLnet or FL-net Unit Support Software.
1 1 Operates with the default setting
(192.168.250.
node_address_switch_setting ).
Bit Description
0
0 Store in CPU Unit
Stores the data link tables (FA link allocations) in the System Bus Unit setup
area of the CPU Unit.
1 Store in FL-net Unit
Stores the data link tables (FA link allocations) in the FL-net (Ver. 2.00) Unit
EEPROM.