Omron CJ1W-FLN22, Operation Manual, Page: 140 / 277

Command/Response Reference Section 7-5
114
Application Example
This example shows a program with the TRANSPARENT FRAME SEND com-
mand.
Sample Configuration The FINS 2901 command executes at the point indicate by this mark and a
transaction code is sent.
Operation • Set the TRANSPARENT FRAME SEND command starting at D01000 in
the CPU Unit.
• Send the transaction code (100) and 10-byte data to node number 2.
• Store the results of the transmission starting at D02000.
Command [CMND S D C]
S D01000 +0: 2901 Hex
+1: 4641 Hex (Fixed)
+2: 434E Hex (Fixed)
+3: 0000 Hex (Fixed)
+4: 004A Hex = 64 + 10 = 74 bytes
:
+7:
0001 Hex
+8: 0002 Hex Destination node = 2
:
+21:
0064 Hex Transaction code = 100
:
+29:
0101 Hex (Fixed)
+30: 004A Hex = 64 + 10 = 74 bytes
:
+32:
Data (10 bytes long)
:
+36
D D02000 : First word of the stored responses
C D00000 +0: 004C Hex No. of command data bytes
+1: 0004 Hex No. of response data bytes
(including command
and response codes)
+2: 0000 Hex Remote (destination)
network address = 0
(local network)
+3: 0010 Hex Remote (destination)
node number = 0
(local node number)
Remote (destination)
unit address = 10 Hex
* Be sure to set the unit
address of the FL-net Unit
FL-net
Unit
OMRON PLC
OMRON PLC/other manufacturer’s PLC
CPU Unit
By CMND
instruction
FL-net
Unit
CPU Unit
Node number 1
Unit number 0
Node number 2
Arbitrary transaction code frame