Omron CJ1W-FLN22, Operation Manual, Page: 153 / 277

127
Command/Response Reference Section 7-5
Application Example
This example shows a program with the WORD BLOCK DATA READ
(unspecified node number) command
Sample Configuration The FINS 2923 command executes at the point indicated by this mark and a
WORD BLOCK DATA READ frame (transaction code: 65005) is sent.
Operation • Write the WORD BLOCK DATA READ (specified node number) command
starting at D01000 and store the response data starting at D02000 in the
CPU Unit.
• Read 100 words of data from the virtual address (00020000 hex) of a
non-OMRON FL-net (Ver. 2.00) node number 2 to addresses starting
from D02002 of an OMRON PLC two levels away on the FINS network
(The command code is stored at D02000 and the response code is stored
at D02001.).
Command [CMND S D C]
S D01000 +0: 2923 Hex
+1: 0002 Hex Read source node number
+2: 0000 Hex First address of the virtual
address space
+3: 0000 Hex Refer to the manual for the
other manufacturer’s FL-net
node.
+4: 0064 Hex Size of the data that is read
(100)
D D02000 : First word of the stored responses
C D00000 +0: 000A Hex No. of command data bytes
+1: 00CC Hex No. of response data bytes
(including command and
response codes)
+2: 0002 Hex Remote (destination)
network address = 2
FL-net
Unit
OMRON PLC
OMRON PLC/other manufacturer’s PLC
CPU Unit
By CMND
instruction
FL-net
Unit
CPU Unit
Node number 2
Word block read frame;
(Request transaction code: 65005),
(Response transaction code: 65205)
CPU Unit
CLK Unit
CLK Unit
Network 1
Node address 1
Network 2
Node address 1
Unit number 1