SECTION 13 |
119
ADJUSTING PROCESSING PARAMETERS
Process
Routes post-processor audio to the output.
Bus 1-4
Routes the selected mix bus to the output.
Input Repl.
Routes the selected processor input signal (analog, digital or AoIP) to the output.
Input Repl.
Routes the selected input signal directly to the output.
Mic Repl.
Routes the microphone input directly to the output.
Digital Repl.
Routes the digital input directly to the output. (Note: AES/EBU inputs are “split” stereo pairs. AES input 1 Left will
feed output 1, AES input 1 Right will feed output 2, and so on.)
ULA Repl.
Routes the ULA (AoIP) input directly to the output. Routing will be affected by how “ULA L/R Mode” is set. If
it is set to “On Both L/R”, the routings will be 1:1 (i.e. ULA input 1 will route directly to analog output 1, ULA
input 2 will route directly to analog output 2). If it is set to “Separate L/R” the behavior will be similar to the
digital inputs (ULA input 1 left will route to analog output 1, ULA input 1 right will route to analog output 2,
and so on).
