SECTION 13 |
116
ADJUSTING PROCESSING PARAMETERS
Post-EQ
This second 4-Band Parametric EQ is allows a final “fine tuning” of the sound after the main 3-Band processing
section to achieve the desired sonic texture. It functions identically to the Pre-EQ section.
Brick Wall Limiter
The Brick Wall Limiter is the final stage of processing before the output. This is the only stage in the chain that
cannot be entirely bypassed. Although the “Drive” control can be turned on and off (set to zero) this stage will not
allow the output of the chain to exceed 0 dBFS.
Metering
Displays the amount of gain reduction being applied by the final brick wall limiter.
Drive
Trims the amount of drive applied to the final brick wall limiter. This section cannot be completely bypassed but
there is a “power button” to essentially set the drive to zero.
Release
Adjusts the release time of the final limiter section. “Medium Fast” is the default.
