SECTION 13 |
115
ADJUSTING PROCESSING PARAMETERS
Ratio
Sets the compression ratio in each band. Higher percentages are more aggressive and lower percentages are less
aggressive.
Fidelity
An exclusive feature as part of the integrated 192 kHz Omnia.S4 processing onboard the VOCO 8, the “Fidelity”
control works to maintain the fidelity and spectral balance of the original input signal even when processing
heavily by proportionally modifying processing thresholds in the background up to the percentage set with
this parameter. There will be no direct visible indication of this control’s action but it should make a noticeable
difference, particularly with aggressive processing settings. A “power button” allows this group of controls to be
bypassed or enabled individually.
Sound Impact
Another exclusive Omnia.S4 feature included in the VOCO 8, the “Sound Impact System” gives the sound more
“punch” and “impact” by dynamically adjusting timing constants based on the incoming audio and looking for
changes smaller than this setting. An indicator at the end of the control will display when SIS is taking effect. A
“power button” allows this group of controls to be bypassed or enabled individually.
Drive
Applies more or less drive to each band. A “power button” allows this group of controls to be bypassed (set to 0) or
enabled individually.
Threshold
Trims the threshold level where the processing begins to act in each band. A “power button” allows this group of
controls to be bypassed (set to 0) or enabled individually.
Attack
Controls the attack time for each band (in dB per second).
Release
Controls the release time for each band (in dB per second).
Out
Adjusts the final output levels from each band.
