manualshive.com logo in svg

Omnia voco 8, User Manual

Share
Download
Omnia voco 8 User Manual Download Page 138

SECTION 17 | 

129

LIVE PRESET ADJUSTMENT 

Mode

No Edit & Save

The default mode of operation. Editing this preset will not be allowed in the “Live” login.

Edit Only

Editing the preset will be allowed, but changes cannot be saved.

Edit & Save

The preset can be edited, but only saved to the same preset.

Edit & Save As

The preset can be edited and saved as a new preset through the “Live” login.

Live Login

The “Live” login is covered in Chapter 7 of this manual. The interface still works as described in that chapter for the 
most part.

Edit

For presets that have “Live Editing” enabled, a new “Edit” button appears alongside the channel’s controls. This 
will open a simplified interface for manipulating preset parameters. The interface is very similar to the “Studio” 
login, without a number of the setup and audio routing options. This “Edit” button will be present if enabled for a 
preset regardless of the display configuration (Default, Minimal, Full, or Custom).

Summary of Contents for voco 8















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands