SECTION 13 |
106
ADJUSTING PROCESSING PARAMETERS
Mic
Selects the microphone input for processing. Allows adjusting Phantom power, pad, and preamp gain.
Phantom Power
Enables or disables 48-volt Phantom power on the microphone input. A red LED will illuminate next to the
corresponding input to indicate Phantom power is enabled. If both the pad AND Phantom power are enabled, the
LED will be yellow (Note: Later software and hardware revisions use the green or yellow LED condition to indicate
whether or not processing is licensed on a channel).
Warning:
Do NOT enable phantom power on inputs where it is not necessary. Damage to the connected
equipment may result if it is not wired correctly or not designed to handle the presence of
phantom power.
Mic Pad
Enables or disables a -20 dB pad on the mic input. A green LED will illuminate on the rear panel near the corre-
sponding input to indicate the pad is engaged. (Note: Later software and hardware revisions use the green or
yellow LED condition to indicate whether or not processing is licensed on a channel).
Preamp Gain [dB]
Sets the microphone preamplifier gain.
Line
Selects the analog line input for processing.
Reference
Adjusts the internal digital reference level relative to the analog line input signal.
