SECTION 3 |
8
INSTALLATION
Input Status Indicator LEDs
Next to each of the combo connectors is an LED that indicates the status of Phantom power and the switchable -20
dB pad. These settings are controlled through the Remote Gateway software.
CAUTION:
Ensure Phantom power is only enabled on channels where it is necessary. Damage may result to
microphones or sources not designed to accept Phantom power.
♦
Off: Phantom power off, pad disabled
♦
Red: Phantom power on, pad disabled
♦
Green: Phantom power off, pad enabled
♦
Orange: Phantom power on, pad enabled
These LEDs will all briefly illuminate orange at power up but should reflect the current status once the unit is fully
operational.
Note:
Later software/hardware revisions changed the designation of the “Green” LED condition to indicate
whether or not a channel is licensed for audio processing. As of software version 1.15, all channels
should be available for basic preamp and I/O functions, regardless of whether or not processing
functions are licensed.
