SECTION 9 |
77
“STUDIO” ACCOUNT
L/AES67
Auto Naming Mode
Name Mode/Label Mode
Determines the source for the name of each output sent to the AoIP network. By default, the names are indepen-
dent and will be configured in the settings for each output. “Use Channel Name” will automatically label the AoIP
output with the channel name, and “Use Preset Name” will use the name of the preset loaded on that channel.
“Name” and “Label” are used in different ways on the AoIP network to identify channels. Experiment with both (or
set them the same) to see which method is best for your installation.
L/AES67 Stereo Output Mode
ULA L/R Mode
Controls the audio configuration for AoIP outputs. When set to “On both L&R”, audio sent on the output stream
is duplicated on both left and right channels. The result is essentially 8 mono AoIP output channels. When set to
“Separate L/R”, there are 4 stereo AoIP outputs. Behavior in this mode is similar to the AES outputs (Channel 1
will feed AoIP output 1 Left, Channel 2 will fed AoIP output 1 Right, and so on).
AoIP Output Configuration
The AoIP outputs (like the inputs) can be configured in a number of different ways—Livewire, AES67, separate
L/R audio, or same audio on L&R. The options displayed for these outputs (and the number of outputs) will vary
depending on how the “Profile” and “ULA L/R Mode” parameters are set.
Livewire {x} 1-4 (Livewire mode, Separate L/R audio)
