SECTION 3 |
9
INSTALLATION
AES/EBU I/O
The VOCO 8 provides 4 AES/EBU inputs and outputs on a female DB25 connector conforming to the Tascam AES/
EBU pinout.
Each AES/EBU interface carries 2 channels of audio—Microphones 1 and 2 will feed the left and right channels
of AES/EBU output 1, and so on. If your mixer or router will not “split” left and right from an AES/EBU feed, you
may wish to use only the even or odd channels.
Note that if you use a DB25 cable to directly connect this I/O to the AES/EBU DB25 port on another device, it
MUST use the Tascam pinout (not Yamaha) and the cable MUST reverse the appropriate input and output pairs
(input to output, output to input). Pre-manufactured cables are available which reverse the appropriate pairs and
adaptors are available to convert between Tascam and Yamaha pinouts.
Tascam standard AES/EBU DB25 pinout (Female connector on chassis, male connector on cable)
