Olivetti d-Copia 300, Operation Manual

Page: 218 / 288

Section 7 COPIER MANAGEMENT FUNCTIONS
7-80
●
Erased border width
Perform the following procedure to determine the default value for the
width of the border to be erased in the two border erase modes.
1 Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-61.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Register
orig. size Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management Bypass
setting
Document
Management Register
orig. size Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
Select “Default erase width” in the settings list on the left side
of the touch panel and then touch the “Change #” key.
The “Default erase width” screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Change #
Default setting
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Sort : On
Rotate
Left
1 /
4
" 0"
Border 1 /
4
" Center 1 /
4
"
999 Set
Default menu
Down
Setting mode
Up
Close
Metric specifications
Default setting / Counter
Copy default
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Sort : On
Rotate
Left 6mm 0mm
Border 6mm Center 6mm
999 Set
Up
Down
Change #
Close
Default setting
Default menu Setting mode
3 Touch the “+” key or the “-” key under the “Border” and
“Center” fields to change the displayed widths to those
desired.
Inch specifications
B o r d e r
C e n t e r " "
A d j u s t d e fa u l t s e t t i n g o f e ra s e w i d t h .
D e fa u l t s e t t i n g - C o py d e fa u l t
1
/
4
1
/
4
+ +
– –
(0~ 3 /
4
) (0~1 1 /
2
)
Default erase width Close Back
Metric specifications
Default erase width Back Close
Border Center mm mm
(0~18) (0~36)
Adjust default setting of erase width.
Default setting - Copy default
6 12
+ +
– –
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4 Touch the “Close” key. The touch panel will return to the
screen in step 2.
5 Touch the “Close” key once again. The touch panel will return
to the “Default setting”screen.
6 Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.