Olivetti d-Copia 300, Operation Manual

Page: 173 / 288

Section 7 COPIER MANAGEMENT FUNCTIONS
7-35
●
Total count for specified paper size (1 to 5)
Perform the following procedure when you want to register a specific
paper size in order to calculate and check the copy counts for that
particular size of paper. It is also possible to register a paper size AND
type.
NOTES
• You can register up to 5 different paper sizes for this function.
• If the type of paper is not registered in any of the settings, the
corresponding copy counts for that size of paper will be calculated
regardless of the type of paper that is used. However, if the same
size of paper is registered in another setting along with a paper type,
the counts for the first setting will NOT include copies made with the
type of paper that is registered in the second setting.
1 Select one of the “Total size 1” through “Total size 5” settings
under the “Setting item” column on the left side of the touch
panel and then touch the “Change #” key.
The corresponding setting screen will be displayed.
Inch specifications
Close
Change #
Value Setting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Scanner Managem.
Fax Management
On
On
Excess of limit Setting Unable to use
Def. Val. of coun. limit 999999
Total size 1 8
1
/
2
x11" No specif.
Total size 2 8 1 /
2
x11" No specif.
Total size 3 8 1 /
2
x11" No specif.
Metric specifications
Close
Change #
Value Setting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Scanner Managem.
Fax Management
On
On
Excess of limit Setting You cannot use
Def. Val. of coun. limit 999999
Total size 1 A3 No specif.
Total size 2 B4 No specif.
Total size 3 A4 No specif.
2 Touch the “On” key.
Inch specifications
Close Back
Default setting - Management code menu - Managem. Def. set.
Total size 1
Off
On
Can set totals of paper size and type.
Metric specifications
Close Back
Default setting - Management code menu - Managem. Def. set.
Total size 1
Off
On
Can set totals of paper size and type.
3 Touch the “Select size” key.
Inch specifications
Close Back
Total size 1
Default setting - Management code menu - Managem. Def. set.
Can set totals of paper size and type.
Off
On
Select
size
Select
paper type
Paper size Paper type
With no
specif.
8
1
/
2
x11"
Metric specifications
Close Back Total size 1
Default setting - Management code menu - Managem. Def. set.
Can set totals of paper size and type.
Off
On
Select
size Select
paper type
Paper size Paper type
With no
specif.
A4
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 1.