Olivetti d-color MF551, Operation Manual

Page: 37 / 297

d-Color MF651/551 3-3
3.1 Control panel
3
3 Control Panel/Liquid Crystal Display
3.1 Control panel
Use the control panel for User Box mode operation. The following describes the buttons and switches in the
control panel.
No. Name Description
1 Touch panel Various screens and messages are displayed. Configure the various set-
tings by directly touching the panel.
2 Main power indicator Lights up in green when the machine is turned on with the main power
switch.
3 [Sub power switch] Press this switch to turn on/off machine operations, including copying,
printing and scanning. When turned off, the machine enters an energy
conserving mode.
4 [Power Save] Press this key to enter Power Save mode. While the machine is in Power
Save mode, the indicator on the [Power Save] key lights up in green and
the touch panel goes off. To exit from Power Save mode, press the [Pow-
er Save] key again.
5 [Mode Memory] Press this key to register (store) the desired copy/scan settings as a pro-
gram or to recall a registered copy/scan program.
6 [Utility/Counter] Press this key to display the Utility screen and the Meter Count screen.
7 [Reset] Press this key to clear all settings (except programmed settings) entered
using the control panel and touch panel.
8 [Interrupt] Press this key to enter Interrupt mode. While the machine is in Interrupt
mode, the indicator on the [Interrupt] key lights up in green and the mes-
sage "Now in Interrupt mode." appears on the touch panel. To cancel In-
terrupt mode, press the [Interrupt] key again.
9 [Stop] Pressing the [Stop] key during scanning temporarily stops the scan op-
eration.
1
2
5
4
6
3
7
8
9
14 13 10
15
16
17
18
12 11
19
20
21
22