Oki MC573 Advanced Manual Download Page 113

Page: 113 / 507

- 113 -

4. Print

Printing on Various Types of Paper

This section describes how to print on various type of paper.

• Printing on Envelopes
• Printing on Labels
• Printing on Long Paper
• Printing on Custom Size Paper

• Attaching the Envelope Lever
• Loading Envelopes
• For Windows PCL Printer Driver
• For Windows PS Printer Driver
• For Mac OS X

• Curling or creasing may occur after printing. Be sure to perform a test print to check that no problems exist.

• Load envelopes with the address side up in the direction as described below.

- If you are using envelopes with the flap (for gluing) on the long edge (Monarch, Com-9, Com-10, DL, C5), load

them with the flap folded so that the flap is on the left side when fed.

• Duplex printing is not available for envelopes.

Attaching the Envelope Lever

If a printed envelope is wrinkled, attach the envelope lever to the fuser unit.

Remove the envelope lever from the MP tray.

Remove the fuser unit from the machine.

For details, see "Replacing the Fuser Unit".

Printing on Envelopes

Summary of Contents for MC573




























































































































































































































































































































































































































































































































Search results

Summary of Contents for MC573

Reviews:

Related manuals for MC573

Brands by name

Popular brands

Oki MC573, Advanced Manual

Search results

Summary of Contents for MC573

Reviews:

Related manuals for MC573

Brands by name

Popular brands