Oki MC573 Advanced Manual Download Page 94

Page: 94 / 507

- 94 -

3. Scan

Send a fax by following the on-screen instructions.

Changing the Setting of Each ActKey Button (ActKey)

You can change the settings of each of four scan buttons.

Start ActKey.

Select [Button settings] from the [Options] menu.

Click a button to set.

Change the setting if necessary.

• The default save destination is automatically created when ActKey is installed.

• The scanned data is saved in the save destination folder with "file name (date) sequential number".

Click [OK].

Summary of Contents for MC573




























































































































































































































































































































































































































































































































Search results

Summary of Contents for MC573

Reviews:

Brands by name

Popular brands

Oki MC573, Advanced Manual

Search results

Summary of Contents for MC573

Reviews:

Brands by name

Popular brands