Oki MC573 Advanced Manual Download Page 257

Page: 257 / 507

- 257 -

6. Maintenance

Cleaning Each Part of the Machine

This section describes how to clean the machine and parts.

• Cleaning the Surface of the Machine
• Cleaning the Document Glass (User's Manual)
• Cleaning the Document Feed Rollers
• Cleaning the Paper Feed Rollers (Tray 1/Tray 2/Tray 3)
• Cleaning the Paper Feed Rollers (MP Tray)
• Cleaning the LED Head (User's Manual)

• Do not use benzine, thinners, or alcohol, because they may damage the plastic parts of the machine.

• Do not lubricate the machine with oil. Do not apply oil.

Turn the machine off.

Turning the Machine Off (User's Manual)

Wipe the surface of the machine with a soft cloth that has been slightly
moistened with water or neutral detergent and then squeezed well.

Do not use other than water or neutral detergent.

Dry the surface of the machine with a dry soft cloth.

Cleaning the Surface of the Machine

Summary of Contents for MC573




























































































































































































































































































































































































































































































































Search results

Summary of Contents for MC573

Reviews:

Brands by name

Popular brands

Oki MC573, Advanced Manual

Search results

Summary of Contents for MC573

Reviews:

Brands by name

Popular brands