Oce VarioLink 2221 User Manual Download Page 70

Page: 70 / 364

Transmission

VarioLink 2221/2821/3621

2-27

ran

iss

ion

Chapter 2

Check the specified in-
formation.

Touch [Enter] to finish checking the settings.

Dest. tab

Up to four selected destina-
tions can be viewed in each
screen. If more than four des-
tinations have been selected,
touch [

↓

] or [

↑

] to display a dif-

ferent screen. Destinations
can be deleted or added.

: Indicates that the recipient was selected using the one-touch dial
buttons.

: Indicates that the fax number was directly typed in.

[Delete]: Touch this button to delete the selected recipient.

[Detail]: Touch this button to check the transmission mode of the selected re-
cipient.

[Next Destination]: Touch this button to add a recipient.

Detail

For details on adding a recipient, refer to “Specifying a recipient” on
page 2-17.

Summary of Contents for VarioLink 2221













































































































































































































































































































































































Search results

Summary of Contents for VarioLink 2221

Reviews:

Related manuals for VarioLink 2221

Brands by name

Popular brands

Oce VarioLink 2221, User Manual

Search results

Summary of Contents for VarioLink 2221

Reviews:

Related manuals for VarioLink 2221

Brands by name

Popular brands