Oce VarioLink 2221 User Manual Download Page 350

Page: 350 / 364

Reports and lists

VarioLink 2221/2821/3621

12-17

por

ts an

d list

r 12

12.7

Checking the settings for each function (Setting List)

A list of all settings specified on this machine can be printed. The settings list
can only be printed by the administrator.

Printing the settings list

Press the [Utility/Counter] key, and then enter Administrator mode.

–

For details on entering Administrator mode, refer to “To display the
Administrator Management screen” on page 10-15.

Touch [Admin. 1].

Touch [Print Lists].

Touch [Setting List].

The settings list is print-
ed.

Summary of Contents for VarioLink 2221













































































































































































































































































































































































Search results

Summary of Contents for VarioLink 2221

Reviews:

Related manuals for VarioLink 2221

Brands by name

Popular brands

Oce VarioLink 2221, User Manual

Search results

Summary of Contents for VarioLink 2221

Reviews:

Related manuals for VarioLink 2221

Brands by name

Popular brands