Oce VarioLink 2221, User Manual

Page: 261 / 364

10
Utility mode
10-78 VarioLink 2221/2821/3621
Utility mode
Chapter 10
Specifying the setting for selecting paper when printing received
documents (mode 008)
Specify the settings for selecting paper when printing received documents.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page Refer-
ence
7 Specifies how to de-
termine whether or
not there is paper.
(Available only when
printing received
documents.) 0 Paper priority method
(determined by whether
or not there is paper) p. 3-5
1 Tray paper method (de-
termined by the tray pa-
per size setting or the
previous paper informa-
tion, regardless of wheth-
er or not there is paper)
6, 5, 4, 3 Specifies the paper
size according to the
received image.
(Available only when
printing received
documents.) 0000 Automatically selects the
appropriate paper ac-
cording to the length and
width of the transmitted
document. p. 3-5
0100 Does not select paper
with a width larger than
the width of the transmit-
ted document.
1000 Selects paper with a
width that is the same as
the width of the transmit-
ted document.
Others *Do not specify any set-
tings other than those
mentioned above when
specifying settings for
this function.
2, 1, 0 ----------------------- 000 *Do not change these bits
when specifying settings
for this function. ----------