Oce VarioLink 2221 User Manual Download Page 228

Page: 228 / 364

Utility mode

VarioLink 2221/2821/3621

10-45

Utility mode

Chapter 10

Specify the desired set-
tings.

To specify the reception method (Reception Mode)

Set “Reception Mode” to
either “Auto” or “Manu-
al”.
–

Auto: Select this set-
ting to specify auto-
matic reception.

–

Manual: Select this
setting to specify
manual reception.

To specify the number of rings (Numbers of RX Call Rings)

Type in the number of
rings until the call is au-
tomatically received.
–

The number of rings
can be set between 1
and 20.

Note

If the number of rings is set
for 10 or more, the recep-
tion may not be complet-
ed, depending on the sender’s fax machine.

Summary of Contents for VarioLink 2221













































































































































































































































































































































































Search results

Summary of Contents for VarioLink 2221

Reviews:

Related manuals for VarioLink 2221

Brands by name

Popular brands

Oce VarioLink 2221, User Manual

Search results

Summary of Contents for VarioLink 2221

Reviews:

Related manuals for VarioLink 2221

Brands by name

Popular brands