Oce VarioLink 2221, User Manual

Page: 280 / 364

Utility mode
10
VarioLink 2221/2821/3621 10-97
Utility mode
Chapter 10
Specifying settings to limit the use of communication modes-3/Specify-
ing restrictions for registering fax addresses and printing reports and
specifying how one-touch dial recipients are displayed (mode 477)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
Specify whether or not fax addresses can be registered and reports can be
printed by users, and specify whether or not one-touch dial information is
displayed in screens and reports.
2
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not nor-
mally be displayed.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page Refer-
ence
7 Specifies whether or
not the use of the
computer (scanner)
is prohibited. 0 Permitted ----------
1 Prohibited
6 Specifies whether
settings for register-
ing fax addresses or
printing reports can
be specified by only
the administrator or
also by the user. 0 Settings can also be
specified by users. p. 10-48
1 Settings can only be
specified in Administrator
mode.