Oce VarioLink 2221, User Manual

Page: 275 / 364

10
Utility mode
10-92 VarioLink 2221/2821/3621
Utility mode
Chapter 10
Specifying settings for the information indicated in the report for IP relay
transmissions (mode 368)
Specify whether or not the results of IP relay transmissions are indicated in
the reception report.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 1 1 0 0 0 0 1 0 (HEX: C2)
Bit Description Setting Description Page Refer-
ence
7 ----------------------- 1 *Do not change this bit
when specifying settings
for this function. ----------
6 Specifies the valid
range of administra-
tor passwords.
*Regardless of the
setting specified for
this bit, this machine
is set to normally re-
quire the administra-
tor password with
the machine and
with Web Connec-
tion. 1 The administrator pass-
word is required with this
machine and with Web
Connection. ----------
5, 4, 3, 2 ----------------------- 0000 *Do not change these bits
when specifying settings
for this function. ----------
1 Specifies whether or
not the results of
scan transmissions
are indicated in the
transmission report. 0 Not indicated ----------
1 Indicated
0 Specifies whether or
not the results of IP
relay transmissions
are indicated in the
reception report. 0 Not indicated p. 12-6
1 Indicated