NTT docomo Foma D900i, Manual

Page: 253 / 284

251
2-press Method
Entering Characters in 2-press Method
Character
E
ntry
Character
Entry
Character
E
ntry
Characters can be entered by pressing two numeric keys for each character.
[Select Input Method]
Setting 2-press Method
To use 2-press Method to enter characters, you must set the input method.
[Default] モード1（かな方式） Mode 1 (5-press Method)
1
In standby, select “ 設定 ” “ 文字入力 ” “ 文字入力方式切替 ” from the
menu.
2
Select “2. モード2 ( 2タッチ方式 )” and press ( 選択 ).
2-press Method is set.
•
To return to 5-press Method, select “1.
モード1
(
かな方式
)”.
•
To switch between the input methods during entering characters, press and hold down .
■ To switch between the input methods using the special mode
1
Press (
特殊
) in the character entry screen.
2
Select “08.
文字入力方式切替
” and press (
選択
).
3
Select “2.
モード2
(
2タッチ方式
)” and press (
選択
).
Switching entry modes
Each time ( 文字 ) is pressed, the entry mode changes as follows:
In the Kanji mode, double-byte Kanji, Hiragana, Katakana, alphanumeric characters can be entered.
In the Kana mode, single-byte Katakana, alphanumeric characters can be entered. The character
assignment is the same as in the Kanji mode.
•
To switch to the special mode, press ( 特殊 ).
•
Available entry modes vary by the function or entry.
▲ ▲
Kanji mode (double-byte) Kana mode (single-byte)
▼ ▲
Uppercase mode Lowercase mode
Kanji mode
Kana mode
漢大 漢小
半カナ大 半カナ小
Entering characters
The description below shows how to enter Katakana characters in the Kana mode.
•
Follow the same steps to enter characters in the Kanji mode.
•
To convert to Kanji and to enter characters in the special mode, follow the same steps as those
for mode 1 (5-press Method) (see p.234).
•
Character assignment table (see p.261)
1
In the character entry screen, press ( 文字 ) to switch to the Kana mode.
•
To switch between uppercase and lowercase, press
.
•
The entry modes are indicated as follows:
Entering “
ｽｽﾞｷ
”
Example