NTT docomo Foma D900i, Manual

Page: 166 / 284

164
Setting the PIN Codes (continued)
Advanced
O
perations
Restricting
M
obile
Phone
O
perations
Entering the PIN1 Code
1 Press and hold down to turn the power on.
•
According to the services you subscribe to, the service provider selection screen appears.
In such a case, select the service provider and press
(
選択
).
2
Enter the PIN1 code and press ( 選択 ).
The Standby screen appears.
•
The default PIN1 code is “ 0000 ”. You can change it to another number (see p.163).
•
Entered numbers are masked with a series of “ ̲ ”.
•
If you make a mistake, use to delete the “
̲
” and enter the correct number.
•
If you could not enter the correct PIN1 code, you can try again. If you fail to enter the PIN1 code
3 times, the screen for entering the PIN lock cancel code appears (see p.165).
When PIN1 Entry ON/OFF is set to on, the PIN1 code entry screen appears when
turning the power on. Unless you entered the correct PIN1 code, you can neither make
a call nor perform communication.
4
Reenter the new PIN2 code and press ( 選択 ).
The PIN2 code is changed.
•
When you could not enter the current PIN2 code correctly, repeat from Step 3. When you fail to enter
the current PIN2 code 3 times, the screen for entering the PIN lock cancel code appears (see p.165).
•
If the second entry of the new PIN2 code did not match the first entry, repeat from Step 3.