NTT docomo Foma D900i, Manual

Page: 181 / 284

179
Advanced
Operations
Using
the
Timer
a
nd
Schedule
F
unctions
•
When you have saved a schedule entry for a certain day, appears in the Standby screen on that day.
However, if the Secret setting is enabled for all schedule entries on that day, the icon does not appear.
•
The Schedule screen is displayed when the scheduled time is reached while in standby or during a call.
If the Secret setting is enabled for a schedule entry, the Schedule screen is not displayed and “
予定の時間
になりました (Scheduled time has come)” appears when the scheduled time is reached.
•
When sound or vibrator is set, an alarm tone or vibration notifies you about the activity
while the Schedule screen is displayed. Press
(OK) or wait about 20 seconds for
the alarm tone or vibration to end and the previous screen to reappear. (Alternatively,
you can press
, , or to stop the alarm tone or vibration.)
•
When the scheduled time arrives during any of the following, the previous screen
reappears after an alarm tone or vibration:
• While displaying the edit screen, such as the Phonebook Entry screen or Compose
Mail screen
• While displaying site, screen memo or received mail item
• While Barcode Reader is active, etc.
•
When the scheduled time is reached during a call, you cannot hear the other party’s voice and the other
party cannot hear your voice while the alarm sounds or the terminal vibrates.
•
When the power of the FOMA terminal is not on at the specified time, and while PIM Lock or All Lock is
set, the Schedule screen is not displayed, the alarm does not sound and the terminal does not vibrate.
•
When the number of characters in a schedule entry exceeds one screen, you can press or to
move the display range.
•
Changing the alarm tone (see p.138)
•
Adjusting the volume of alarm tone (see p.136)
When a schedule entry is saved
The icon
disappears
when quitting
the Schedule
screen.
（ ）
SideC
（ ）
Rear
key
•
In month view, Saturdays are indicated in blue, Sundays and holidays are in red. Note that the screen
display does not change even if holidays are changed or created. The holidays are based on the Law
Concerning National Holidays and a law that revises part of the Old Age People’s Welfare Law (law no. 59,
2001) (as of May 2004).
•
The alarm does not sound but the terminal vibrates in the Manner mode. (The terminal also vibrates when
“
音のみ
” is set.)
•
The alarm does not sound (the terminal does not vibrate) in the Drive mode.
•
When the sound/vibrator is set to “
なし
” or “
音のみ
”, the terminal does not vibrate even if the Vibrator
function is on.
•
When an alarm time and a schedule entry are set to the same time, Alarm Time and then Schedule
operate, in that order.
•
When Auto Power On and a schedule entry are set to the same time, the Schedule screen appears after
Wake-up Display.
N o t e
11
Press ( 登録 ).
The schedule entry is saved.
Editing the saved schedule entry
Saved icon
1
Show the schedule entries.
•
Follow Steps 1 - 2 in Saving Schedule Entries (see p.177).
2
Select a schedule entry and press (
選択
).
The Schedule Entry screen appears.
•
For a repeated activity, the scheduled date set as the repetition setting appears in
the “
開始日付 ” field.
3
Edit the schedule entry.
•
Repeat from Step 4 in Saving Schedule Entries (see p.178).
Saved
contents