manualshive.com logo in svg

NTT docomo Foma D900i, Manual

The NTT docomo Foma D900i is a cutting-edge mobile device packed with advanced features. Enhance your experience with our comprehensive user manual, available for free download at manualshive.com. Get the most out of your device and explore its capabilities with our handy manual.

Share
Download
background image

18

SAFETY

PRECAUTIONS

–

Always

follow

these

d

irections–

SAFETY PRECAUTIONS –Always follow these directions– (continued)

CAUTION

Do not drop the FOMA Card or expose it to shock.

• Doing so could cause card failure.

Do not expose the FOMA Card to water.

• Exposing the card to water, urine from pet and other liquids could cause the card to

fail.

Do not expose the FOMA Card to the heat or throw it into a fire.

• Doing so could cause the card to melt, overheat, generate smoke, resulting in failure

and loss of data.

Do not use or place the FOMA Card close to a fire, stove or other heating
device.

• Doing so could cause the card to melt, overheat, generate smoke, resulting in failure

and loss of data.

Store the FOMA Card out of reach of small children.

• Failure to do so could result in injury.

Take care when removing the FOMA Card (IC section) to prevent injury
to hand and fingers.

Do not disassemble or alter the FOMA Card.

• Doing so could cause data loss or damage.

Do not bend or place heavy objects on the FOMA Card.

• Doing so could cause the card to fail.

Do not to damage the IC.

• Doing so could cause the card to fail.

Do not touch the IC or short-circuit it.

• Doing so could cause data loss and failure.

Using the FOMA Card

WARNING

Do not place the FOMA Card in a microwave oven, pressure cooker or
other heating device.

• Doing so could cause the card to melt, overheat, generate smoke, resulting in failure

and loss of data.

Summary of Contents for Foma D900i





























































































































































































































































































Reviews:

No comments

Related manuals for Foma D900i

Xiaomi POCO X4 Pro 5G Manual preview
POCO X4 Pro 5G
Brand: Xiaomi Pages: 16
Samsung SGH-T399 Manual Del Usuario preview
SGH-T399
Brand: Samsung Pages: 343
AGM 2A3DR-H5 Manual preview
2A3DR-H5
Brand: AGM Pages: 11
UTStarcom GSM718 User Manual preview
GSM718
Brand: UTStarcom Pages: 55
Verykool i270 User Manual preview
i270
Brand: Verykool Pages: 62
SoftBank 202SH User Manual preview
202SH
Brand: SoftBank Pages: 98
iiNet BizPhone Premium T48U User Manual preview
BizPhone Premium T48U
Brand: iiNet Pages: 26
Cisco UNIFIED 6911 (Portuguese) Início Rápido preview
UNIFIED 6911
Brand: Cisco Pages: 1
Huawei 09 Quick Start Manual preview
09
Brand: Huawei Pages: 14
Huawei ANG-LX2 Quick Start Manual preview
ANG-LX2
Brand: Huawei Pages: 50
Huawei AMN-LX2 Quick Start Manual preview
AMN-LX2
Brand: Huawei Pages: 68
Huawei ALP-L09 User Manual preview
ALP-L09
Brand: Huawei Pages: 48
Huawei ANA-LX4 Quick Start Manual preview
ANA-LX4
Brand: Huawei Pages: 20
Huawei ANE-LX1 Quick Start Manual preview
ANE-LX1
Brand: Huawei Pages: 14
Huawei AMN-LX3 Quick Start Manual preview
AMN-LX3
Brand: Huawei Pages: 10
Huawei AMN-LX9X Quick Start Manual preview
AMN-LX9X
Brand: Huawei Pages: 12
Huawei Aqua User Manual preview
Aqua
Brand: Huawei Pages: 32
Huawei AMN-LX3X Quick Start Manual preview
AMN-LX3X
Brand: Huawei Pages: 10

Brands by name

Popular brands

Load more brands