NTT docomo Foma D900i, Manual

Page: 50 / 284

48
Making a Call
Basic
O
perations
Making/Receiving
Calls
■
When you want to stop making a call
Press .
■
When you hear a busy signal
The line is busy. End the call by pressing , wait a while and dial again. You can easily dial
a previously-dialed number using Redial Data (see p.50).
■ If you hear an announcement indicating that the call cannot be connected
The receiver’s FOMA terminal, mobile phone, or PHS terminal is off or in a place where the
signal does not reach.
■
When you hear an announcement asking you to display Caller ID and dial again
The receiver uses Caller ID Display Request Service (see p.219).
Turn Caller ID Notification on or add “186 (
31#)” before the receiver’s phone number and
dial again (see p.217, 52).
1
•
About phone numbers
•
Up to 80 digits are valid for the phone number. If more than 80 digits are
entered, they are discarded from the beginning of digits.
•
If you enter a wrong number:
To delete one digit at a time, press
.
To delete all digits at once, press (
戻る
) or press and hold down
(the Standby screen reappears).
Enter a phone number.
Calling a mobile phone 090-XXXX-XXXX or 080-XXXX-XXXX
Calling a PHS terminal 070-XXXX-XXXX
Calling a general
subscriber phone Enter the area code even when you are in
the same area code.
2
A call is made to the displayed phone number. First the dial tone and then the
ring back tone is heard in the earpiece.
•
If the receiver’s phone number is saved in Phonebook, the name appears.
Press .
The number dissappears once then reappears and start blinking
3
To end the call, press .
Call time is displayed for about 5 seconds and the Standby screen reappears.
•
To quickly return to the Standby screen, press (OK).