NTT docomo Foma D900i, Manual

Page: 91 / 284

89
Basic
O
perations
Making/Receiving
Videophone
Calls
You can redial a call by voice automatically if you call a non-videophone or if a
videophone call is not connected.
1
In standby, select “ 設定 ” “ TV電話 ” “ 音声自動再発信設定 ” from
Menu.
2
Select “1. ON ” and press ( 選択 ).
Auto Redial by Voice is set.
•
To cancel the setting, select “2. OFF ”.
[Set Auto Redial by Voice]
Making a call by voice when a videophone call is not connected
[Default] OFF
▲ ▲
1
In standby, select “ 設定 ” “ TV電話 ” “ 応答保留画面選択 ” from Menu.
[Select Answer Hold Screen]
Change images to be sent to the other party during answer hold
When a call is on Answer Hold, the set image and “ 応答保留中 (Answer on hold)” is
sent to the other party.
[Default]
内蔵画像
Preset image
▲ ▲
2
Select a type of screen and press ( 選択 ).
The still image appears.
•
Follow Step 5 in Setting images to be sent to the other party (see p.88).
•
When you make a videophone call to the phone which does not support Videophone, the other party’s
phone is out of area or turned off, it cannot be connected. When you make a voice phone call to the phone
which does not support Videophone and Auto Redial by Voice is “
ON ”, the call is terminated before
connected and redialed as a voice phone call. However, it may not be operated if you make a call to the
ISDN Videophone which does not support an ISDN synchronous 64K or PIAFS access point, 3G-324M (see
p.72) (as of May 2004), or if you make a call to a wrong number. Note that the call may be charged.
•
Auto redial by voice is not performed in the following cases:
• The other party sets Drive Mode. • The other party is busy.
• You make a call to a phone number not being used.
• The other party is in a location where signals do not reach or the other party turns power off.
• The call is connected to Videophone.
•
A call redialed by voice while Auto Redial by Voice is set to “
ON
” is charged not as a digital communication
but as a voice call.
N o t e