NTT docomo Foma D900i, Manual

Page: 196 / 284

About Multiaccess
194
Advanced
Operations
Multiaccess/Multitask
Your FOMA terminal can make a voice call and packet communication at the same
time. It can further provide Short Message Service (SMS) at the same time.
Connecting to i-mode during a voice call
1 circuit Voice call
1 circuit
Packet communication (i-mode, i-mode mail, packet communication
with your FOMA terminal connected to a PC, and so on.)
1 circuit Short Message Service (SMS)
You can use a maximum of the 3 circuits shown below at the same time:
Main operations that can be performed with Multiaccess
1 Press during a voice call.
The active list appears.
2 Display i-mode sites.
1
Select “
ｉモード
” and press (
選択
).
i-mode Menu appears.
2
Select “ Menu ” and press ( 選択 ).
iMenu appears.
•
You can press , select “
音声通話
” or “
ｉモード
”, and press (
選択
) to switch between the
talking screen and the site display screen.
•
When site display ends, your FOMA terminal returns to the talking screen.
•
To finish talking with the site display screen displayed, switch to the talking screen and press
.
During a voice call
Connecting to a voice call and i-mode at the same time
•
During Multiaccess, each individual circuit is billed.
•
Since Videophone and 64K data communication do not support Multiaccess, you cannot use voice call or
i-mode during a videophone call or 64K data communication. However, you can receive messages in Short
Message Service (SMS) (but you cannot send messages).
•
For details about combinations of Multiaccess, see p.265.
N o t e