NTT docomo Foma D900i, Manual

Page: 164 / 284

162
Advanced
O
perations
Restricting
M
obile
Phone
O
perations
Setting the PIN Codes
162
[Default] 0000
Change Terminal ID
Changing the Terminal ID Number
1
In standby, select “ 設定 ” “ プライバシー ” “ 暗証番号の変更 ” from
Menu.
2
Enter your current terminal ID number and press ( 選択 ).
•
The default terminal ID number is “0000”.
•
Entered numbers are masked with a series of “
̲
”.
•
If you make a mistake, use to delete the “
̲
” and
reenter the correct number.
•
When the entered terminal ID number is not correct,
“
暗証番号が違います
(Wrong ID code is input)”
appears followed by the Standby screen.
•
When no terminal ID number is entered for 15
seconds, the Standby screen is automatically
displayed. Repeat the operation from the beginning.
3 Enter a new terminal ID number and press ( 選択 ).
•
The new terminal ID must be 4- to 8-digits. “ # ” and “ ” cannot be used.
•
If you make a mistake, use to delete the number and reenter the correct number.
4
Select “ はい ” and press ( 選択 ).
Your terminal ID number is changed.
•
To not change it, select “ いいえ ”.
▲ ▲
The PIN codes include PIN1 code and PIN2 code.
•
The PIN1 Entry ON/OFF setting enables you to specify whether to require entering the PIN1
code when the power is turned on.
•
You can change the PIN1 code and PIN2 code to any numbers you like.
•
PIN1 code and PIN2 code (see p.35)
[Set PIN1 Entry ON/OFF]
Setting to enter the PIN1 code when turning the power on
[Default] OFF
1
In standby, select “ 設定 ” “ プライバシー ” “ PIN1入力ON/OFF設
定 ” from Menu.
2
Select “1. ON ” and press ( 選択 ).
•
If you select “ON” when the PIN1 Entry ON/OFF setting is on or if you select “OFF” when the
setting is off, Step 3 is not necessary.
•
To set to not enter the PIN1 code, select “2.
OFF
”.
▲ ▲
3
Enter the PIN1 code and press ( 選択 ).
Entering PIN1 code is set to be requested.
•
The default PIN1 code is “ 0000 ”.