— A-2 —
[Example] Verify the channel program start command “RUN” is ON.
(i)
:_
(ii)
:IO_
O
I
(iii)
:IO/RP_
R
P
/
(iv)
Press the enter key to execute.
Read-out starts immediately after the input.
:IO/RP
0010000000/000
ENT
RUN
(v)
Press the back space key to discontinue read out. If it is not pressed, read out will be
repeated and the next command can not be accepted.
:IO/RP
0010000000/000
:_
BS
l
Above example shows that read out of RUN input is “1”, which indicates “RUN” input is ON.
[Reference]
à
Read-out follows the changes of signal status while repeating reading-out.
(Signals ON and OFF are followed by 1 and 0 in the display.)
à
If the option code “/RP” is not entered, the read-out at the moment will be displayed
for only once.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
