— 12-1 —
12. Command and Parameter
12.1. Command and Parameter List
l
Connect the Handy Terminal FHT11 to CN1 connector of the Driver Unit. When the display
shows “NSK MEGA•••” the system is in the normal state.
l
Some parameters shown in Tables 12-1 shall be changed according to the actual operating
condition from the shipping setting.
l
Parameters in a parenthesis ( ) are set at the factory before shipment and are normally fixed. If
the setting is to be changed, contact NSK.
* Current Setting
à
We recommend writing down the current settings for your future reference. You may
need to refer to them when changing the operating conditions or readjusting the system.
For your convenience, a parameter and program setting list provided in the last page of
this manual.
**
à
The setting value varies with the Motor size. These are set at the factory. Do not
change the settings.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
