●
DNS addresses
— Enter the IP addresses of the
primary and secondary DNS servers, if required
by your service provider. To obtain these
addresses, contact your internet service
provider.
●
Proxy server address
— Enter the address of
the proxy server.
●
Proxy port number
— Enter the port number
of the proxy server.
WLAN internet access points
Press
, and select
Tools
>
Settings
>
Connection
>
Destinations
>
New access
point
, and follow the instructions on the screen. Or,
open one of the access point groups, select an
access point marked with , and select
Edit
.
Follow the instructions from your WLAN service
provider.
●
WLAN network name
— Select
Enter
manually
or
Search for networks
. If you select
an existing network,
WLAN network mode
and
WLAN security mode
are determined by the
settings of its access point device.
●
Network status
— Define whether the network
name is displayed.
●
WLAN network mode
— Select
Ad-hoc
to
create an ad hoc network and to allow devices to
send and receive data directly; a WLAN access
point device is not needed. In an ad hoc network,
all devices must use the same
WLAN network
name
.
●
WLAN security mode
— Select the encryption
used:
WEP
,
802.1x
(not for ad hoc networks), or
WPA/WPA2
. If you select
Open network
, no
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network
supports them.
To enter the settings for the selected security mode,
select
WLAN security settings
.
Security settings for WEP
●
WEP key in use
— Select the wired equivalent
privacy (WEP) key number. You can create up to
four WEP keys. The same settings must be
entered on the WLAN access point device.
●
Authentication type
— Select
Open
or
Shared
for the authentication type between
your device and the WLAN access point device.
●
WEP key settings
— Enter
WEP encryption
(length of the key),
WEP key format
(
ASCII
or
Hexadecimal
), and
WEP key
(the WEP key data
in the selected format).
Settings
188
Se
ttings
