Nokia 002F4W8 - N79 Smartphone 50 MB, User Manual

Page: 46 / 215

WLAN internet access points
Press , and select Tools
>
WLAN wiz.
Select Options and from the following:
● Filter WLAN networks — Filter out WLANs in
the list of found networks. The selected networks
are filtered out the next time the application
searches for WLANs.
● Details — View the details of a network shown
in the list. If you select an active connection, the
connection details are displayed.
● Define access point — Create an internet access
point (IAP) in a WLAN.
● Edit access point — Edit the details of an
existing IAP.
You can also use connection manager to create
internet access points. See "Active data
connections", p. 45.
Operating modes
There are two operating modes in WLAN:
infrastructure and ad hoc.
The infrastructure operating mode allows two
kinds of communication: wireless devices are
connected to each other through a WLAN access
point device, or wireless devices are connected to a
wired LAN through a WLAN access point device.
In the ad hoc operating mode, devices can send and
receive data directly with each other.
Connection manager
Active data connections
Press , and select Tools
>
Connectivity
>
Conn. mgr.
>
Active data connections .
In the active data connections view, you can see the
open data connections:
data calls
packet data connections
WLAN connections
Note: The actual invoice for calls and services
from your service provider may vary, depending on
network features, rounding off for billing, taxes,
and so forth.
To end a connection, select
Options
>
Disconnect . To close all open connections, select
Options
>
Disconnect all .
Connections
45
Con
nectio
ns