22
4. How to operate
4-1. Starting by using the operation panel
Following is the procedure outline:
(1)
Wiring, power input
(2)
Switching to local mode
(3)
Speed command settings
(4)
Starting the CW operation
(5)
Stopping the CW operation
(6)
Displaying the selection of rotation direction
(7)
Switching the rotation direction
(8)
Starting the CCW operation
(9)
Stopping the CCW operation
This section describes the procedure to operate motor from the operation panel
in initial setting state.
Ensure that the wiring is correct again before
supplying the power.
Procedure
No.
Explanatory diagram
Details
(1)
See the interconnection diagram and the terminal
description, to connect the power-supply line and
the motor power line to the main circuit terminal.
Also connect the earthing terminal.
* Ensure that the wiring is correct.
Connect (short-circuit) IP (16) and IC (17) of TB1,
and also connect (short-circuit) 0 V (18) and I8 (15).
M L C1 C2 C3 C4
I1 I2 I3 I4 H
6 7 8 9 10 11
1 2 3 4 5
IC 0V E1 E2 E3 E4
I5 I6 I7 I8 IP
17 18 19 20 21 22
12 13 14 15 16
Signal
name
Terminal
No.
Signal
name
Terminal
No.
