6
(General)
●
●
●
●
●
●
●
(Inspection on arrival of the product)
●
(Installation)
●
●
●
●
●
Check whether the product is same as ordered. If an incorrect product is installed, it
may cause injuries, and damage to the device.
Never touch the inner part of the driver. Negligence may cause electric shock.
Immediately stop the product if any abnormality is noticed. Negligence may cause
fire and injuries.
Nissei Corporation shall not be responsible for, and also shall not give any warranty
for the damage caused due to remodeling of the product by the customer.
Operate the product under the conditions specified in this instruction manual.
Negligence may cause malfunctioning of the product.
Do not remove the nameplate.
When installing the product horizontally, take measures to enhance the heat
dissipation. Abnormal overheating of the product may cause fire and burns
depending on the condition under which the product is used.
Do not keep any object that will block circulation of the air around the product.
Negligence can cause abnormal overheating of the product. It may cause fire and
burns.
Do not step on or place any heavy object on the product.
Negligence may cause injuries.
Do not keep any combustible material near the product. Negligence may cause fire.
Caution
Use the specified combination of the motor and driver. Negligence may cause fire
and damage to the equipment.
Do not touch the regenerative resistor, motor, or driver when the power is on or
immediately after turning off the power, as their surfaces may be hot. Negligence
may cause burns.
Never use the product in damp places, corrosive environment, and near flammable
gases and combustible materials. Negligence may cause fire and accidents.
