21
▪
Brake wiring (When the brake is applied)
▪
Wiring the TB1.
Terminal screw of TB1
M2
Tightening torque
0.22
～
0.25 N
・
m
Recommended wire size
0.75 mm
2
(AWG 18)
While connecting TB1, by using the
right driver,
peel off the wire as per the following
measurements and connect.
Brake is released if DC 24 V current is supplied between the B-B of the power
cable.
To turn on/off automatically by the signal from the driver, wire it as shown in
the following diagram.
5.0 mm
-Driver end
Thickness Maximum
0. 4 mm
Width Maximum
2. 5 mm
To brake
B-B
AC 100
～
240 V
To earth
Brake power unit
Brake control code
Black
Blue
DC 24 V Power
(For the customer)
Input
+24 V
0 V
C2 (9
）
TB1
E2 (20)
APQ
VER2
Driver
* In case of
initial values
