26
(8)
Turn off the switch that is connected in (1), to stop
the motor.
After setting 2000 in the constant value, press the
ENTER key.
An input confirmation message "End" will be
displayed for about 1 second.
(7)
Turn on the switch that is connected in (2).
(Turn on the selection of speed command 1.)
Turn on the switch that is connected in (1), to rotate
the motor in CW direction at the specified rotation
speed.
Procedure
No.
Explanatory diagram
Details
(6)
Press [
∧
] key 5 times or [
∨
] key once.
The display will switch to the constant selection
display.
Press the ENTER key to switch to the constant
selection mode.
The constant number portion will blink.
After displaying Pn001, press the ENTER key.
The existing Pn001constant value (2500) will be
displayed.
Use [>] key, and [
∧
] key, or [
∨
] key to change the
set
value.
* The 7 segment LED display as shown on the left
will appear when the set value is 2000.
Press [>] key to change the desired digit (blinking
display).
* The digit to be changed is divided into the upper 1
digit and the lower 2 digits.
Use [>] key, and [
∧
] key, or [
∨
] key to display Pn001.