Drive state
Drive Power LED
(Green)
Drive Service Action
Required LED (Amber)
Normal operation – Drive I/O activity is
occurring.
Blinking
Off
Service action required – A fault condition
exists, and the drive is offline.
On
On
•
LEDs on the controller canister main faceplate
Table 12: LEDs on the controller canister main faceplate
Location
LED
Color
On
Off
1
Ethernet
Connector 1
Link Rate
LED
Green
There is a 1000 Gb/s
rate.
There is a 10BASE-T
rate.
2
Ethernet
Connector 1
Link Active
LED
Green
The link is up (LED
blinks when there is
activity).
The link is not active.
3
Ethernet
Connector 2
Link Rate
LED
Green
There is a 1000 Gb/s
rate.
There is a 10BASE-T
rate.
4
Ethernet
Connector 2
Link Active
LED
Green
The link is up (the LED
blinks when there is
activity).
The link is not active.
5
Host Link 1
Service
Action
Required LED
Amber
At least one of the four
PHYs is working, but
another PHY cannot
establish the same link
to the device connected
to the Host IN port
connector.
No link error has
occurred.
100 | E2700 Controller-Drive Tray and Related Drive Trays Installation Guide
Summary of Contents for E2760
Page 2: ......
