6. Repeat Step
3
through Step
5
to install all of the drives.
7. Slide the drawer back into the drive tray by pushing it from the center and closing both levers.
Attention:
Risk of equipment malfunction – Make sure to completely close the drive drawer
by pushing both levers. You must completely close the drive drawer to allow proper airflow and
prevent overheating.
8. Attach the bezel to the front of the drive tray.
Procedure - Removing drives from a 60-drive tray
If you need to move or ship a 60-drive controller-drive tray or a 60-drive expansion tray, you must
remove all drives from all drawers.
Step
1. Perform the following steps to remove all of the drives from the drive drawer:
a. Raise the drive handle to vertical.
b. Use the handle to lift the drive from the drive drawer.
52 | E2700 Controller-Drive Tray and Related Drive Trays Installation Guide
Summary of Contents for E2760
Page 2: ......
