2
Screws for securing the mounting rail to the cabinet (rear)
3
Existing tray
4
Industry standard cabinet
•
If you are installing the mounting rails above an existing tray, position the mounting rails
directly above the tray.
•
If you are installing the mounting rails below an existing tray, allow 17.8-cm (7-in.) vertical
clearance for the controller-drive tray.
6. To attach the mounting rails to the cabinet, perform one of the following actions:
•
If you are using the long, fixed-size mounting rails, go to step
7
.
•
If you are using the shorter adjustable mounting rails, go to step
8
.
7. Attach the long, fixed-size rails to the cabinet.
a. Ensure that the adjustment screws on the mounting rail are loose so that the mounting rail can
extend or contract as needed.
1
Front of the mounting rail
2
Two M5 screws for the rear EIA support rail
3
Front of the cabinet
4
Two M5 screws for the front EIA support rail
5
Adjustment screws
6
Rear hold-down screw
7
Cabinet mounting holes on the front EIA support rail
8
Cabinet mounting holes on the rear EIA support rail
9
Mounting rail lip
b. Remove the rear hold-down screw. It protrudes from the inside of the rail and prevents you
from sliding the controller-drive tray onto the rails.
Step 4 - Installing the controller-drive tray | 45
Summary of Contents for E2760
Page 2: ......
