Procedure - Installing drives in the E2712 or E2724
controller-drive tray
About this task
In some situations, the controller-drive tray might be delivered without the drives installed. Follow
the steps in this procedure to install the drives. If your controller-drive tray already has drives
installed, you can skip this step and go to
Step 5 - Connecting the controller-drive tray to the hosts
on
page 54.
Attention:
Risk of equipment malfunction – To avoid exceeding the functional and
environmental limits, install only drives that have been provided or approved by NetApp, Inc.
Drives might be shipped but not installed. System integrators, resellers, system administrators, or
users can install the drives.
Note:
The installation order is from top to bottom and from left to right.The installation order is
important because the drives might already contain configuration information that depends upon
the correct sequence of the drives in the tray.
Steps
1. Beginning with the first drive slot (the upper-left slot), place the drive in the slot guides, and slide
the drive all the way into the slot.
2. Push the drive handle to the right (in E2712) or down (in E2724) to lock the drive securely in
place.
•
Installing a drive in the E2712 controller-drive tray
1
Drive handle
Step 4 - Installing the controller-drive tray | 41
Summary of Contents for E2760
Page 2: ......
