1
Screw
Note:
The rear end contains two controllers. The top of the is the side with the labels.
8. Secure the side of the drive tray to the mounting rails by performing these steps:
a. Insert one M4 screw through the side sheet metal of the drive tray into the captured nut on the
side of the mounting rail. Tighten the screw.
b. Repeat this step for the other side.
9. Attach the plastic end caps onto the front of the drive tray.
a. Put the top of the end cap on the hinge tab that is part of the drive tray mounting flange.
b. Gently press on the bottom of the end cap until it snaps into place over the retainer on the
bottom of the drive tray mounting flange.
•
Attaching the end caps to the DE1600 drive tray
1
Hinge tab
2
Retainer
•
Attaching the end caps to the DE5600 drive tray
70 | E2700 Controller-Drive Tray and Related Drive Trays Installation Guide
Summary of Contents for E2760
Page 2: ......
