i. Insert one M5 screw through the front of the mounting rail. You use this screw to attach the
drive tray to the cabinet.
8. Attach the shorter, adjustable size mounting rails to the cabinet.
1
Front of the mounting rail
2
Rear of the mounting rail
3
Rail fix bar
4
Two M5 screws for the front EIA support rail
5
Two clips for the front EIA support rail
6
Rear bracket
a. Make sure that the adjustment screws on the mounting rail are loose so that the mounting rail
can extend or contract as needed. The adjustment screws are on the other side of the previous
figure.
b. Place the mounting rail inside the cabinet, and extend the mounting rail until the flanges on
the mounting rail touch the inside of the cabinet.
c. Insert one M5 screw through the front of the cabinet, and screw it into the top captured nut in
the mounting rail.
Step 6 - Installing the drive trays for the controller-drive tray configurations | 77
Summary of Contents for E2760
Page 2: ......
