1
Top cabinet mounting hole on the rear EIA support rail
2
Bottom cabinet mounting hole on the rear EIA support rail
9. Remove the bezel from the front of the controller-drive tray.
10. With the help of at least three other persons, slide the rear of the controller-drive tray onto the
mounting rails. The controller-drive tray is correctly aligned when the mounting holes on the
front flanges of the controller-drive tray align with the mounting holes on the front of the
mounting rails.
Warning:
(W10) Risk of bodily injury – Four or more persons are required to safely lift the
component.
11. After the controller-drive tray is correctly aligned, remove the enclosure lift handles as shown in
the figure:
a. Use your thumb to unlatch and remove the rear controller-drive tray lift handles (two to a
side).
b. Use the front controller-drive tray lift handles to slide the drive tray all the way into the
cabinet.
c. After the drive tray is secure in the cabinet, use your thumb to unlatch and remove the front
controller-drive tray lift handles (two to a side).
d. Insert the remainder of the tray into the cabinet.
48 | E2700 Controller-Drive Tray and Related Drive Trays Installation Guide
Summary of Contents for E2760
Page 2: ......
